Why Did My Subwoofer Stop Working?

Why is my amp not getting power?

If the remote turn-on wire doesn’t have power, your amp won’t turn on.

If it doesn’t, you’ll want to check for any inline fuses and verify that the wire isn’t loose, corroded, or shorted out somewhere.

If the remote and power wires both check out okay, the next thing to look for is continuity on the ground wire..

Do subwoofers have fuses?

Fuses for subwoofers can be located in-line with the subwoofer wires, within the speaker enclosure, and if there is an amp dedicated to the subwoofer, the fuse could be located there. In-line fuses can have different looks. … You would either unscrew it or pull it apart to access the fuse.

How long should a subwoofer last?

There are a lot of variables that will impact how long your equipment lasts, but in general a good sub can last for 20+ years.

What causes a subwoofer to freeze?

when amplifiers go into clipping, they send square wave voltage to the speakers, which translates to DC voltage. when a voice coil gets DC voltage, it turns the coil into a heating element, and the coil quickly burns up, causing teh cone to “freeze” in such a manner as you’ve described.

How do I reset my Sony subwoofer?

Reset the system.Press the Power button to turn on the soundbar.Press and hold the Power button while pressing the Input button and the VOL- button (at the same time).When RESET appears on the front panel display, release the buttons.Unplug the power cord for 30 seconds.More items…•

How can you tell if a sub is blown?

If the cone is rigid or locked in place, the subwoofer is definitely blown. Even if the cone moves, listen for scratching noises and be sensitive to any movements that are too loose or sluggish, as they may all be signs of a worn suspension.

How do I fix my subwoofer without power?

Try plugging the AC power cord into a different AC outlet to make sure there is not a problem with the current outlet. Make sure the POWER switch on the active subwoofer is set to on. Depending on your subwoofer, turn the POWER SAVE switch to the off position so the active subwoofer remains on at all times.

What does a blown subwoofer sound like?

Partial sound with distortion – When you hear a weak, distorted sound coming from your subwoofer, at any volume, you probably have a partially blown subwoofer on your hands.

Is it worth repairing a subwoofer?

A: The short answer to your question is no, the repair is likely not worth it. The price/performance ratio of subwoofers has improved considerably in the last decade, so finding a subwoofer that matches or beats the AS20’s specifications is not too tough.

What does it mean when your subwoofer makes a popping noise?

So when you change inputs or change listening modes and you hear the subwoofer(or any speaker) “pop” this indicates that particular pre-out jack is not being muted….or not being muted for a long enough period of time. This can indicate there is a failed diode / circuit in the receiver.

Why is my Polk subwoofer not working?

No power. Check to see if the AC outlet is working. If it is, unplug the subwoofer and check the fuse in the subwoofer, which is located just above AC in line on the back of the subwoofer. The fuse type is listed on the back of the sub.

How do you troubleshoot a subwoofer?

Troubleshooting Your Subwoofer No Output Check that all components are plugged in and turned on. Check all interconnecting cables. Check that the subwoofer is connected to the sub out (or other appropriate output) on the receiver/processor/amplifier. Check that subwoofer output is enabled in the receiver/processor’s…

Why is my Samsung subwoofer not working?

Check your wall outlet. Unplug the subwoofer and plug it back in. It should have a standby light if it’s receiving power. If it’s not, test the outlet with something else, like a lamp. If the outlet has no power, the issue is with the outlet (although hopefully it’s something simple, like a tripped circuit).

What happens when a subwoofer blows?

Subwoofers are most commonly blown by supplying too much signal to the car audio amplifier. … The result is a “clipped” signal and this can damage the amplifier and subwoofer. A subwoofer can be heavily damaged by a sustained clipping. You’ll know a clipping sub when it suddenly sounds very odd and loud.

Why would subwoofer stop working?

The most common cause of speaker failure is short-circuiting. A short circuit in the wires providing the signal will prevent the signal from ever reaching the subwoofer. A short circuit at the terminals on the subwoofer will also prevent electrical current and signal from reaching the subwoofer.

Can you fix a blown subwoofer?

To fix your blown subwoofer you’ll need to take it out of your car, fix or replace any damaged parts, and glue/wire it back together. This process can range from easy to very difficult, depending on the problem.

Why does my subwoofer have no sound?

There is no sound from an active subwoofer connected to the television. … Ensure the subwoofer is connected to the MIX or SUB output on the stereo system or TV. Ensure the power cord of the subwoofer is connected to a working AC outlet. Turn on the subwoofer.