Question: What Appliances Use 5 Amp Fuse?

How many watts can a 5 amp fuse take?

1150 WattsIf your lighting circuit at home is protected by a typical 5 amp fuse you can multiply this by the voltage to get 1150 Watts..

What happens if I put a 20 amp fuse in a 15 amp slot?

The 15 amp slot is designed for handling current upto 15 amps so if you put a 20 amp fuse in a 15 amp slot and draw a current greater than 15 amps there will be heating and other issues like molten insulation you can put a 20 amp fuse only if u know that u are not going to draw more than 15 amps.

What happens if you put a lower amp fuse?

Do not use a fuse with a lower rating– don’t put a 20 amp fues in a 30 amp circuit–because it probably will blow prematurely. Conversely replacing a 20-amp fuse with one rated at 30 amps is dangerous because it may not blow soon enough and damage an electrical component or start a wiring fire.

Is it bad to use a higher amp fuse?

In general, NO. Replacing a fuse with a higher-amp fuse is a very bad idea and can lead to fires. Fuses (and circuit breakers) are rated such that they blow or trip before any part of the circuit gets to a dangerous current. … Fix the underlying problem, and you won’t have any more blown fuses.

Can you put a 16 amp fuse in a 13 amp plug?

Yes they will. You’ll get about 150A from a 13A supply, any more than that and the fuse will probably pop but it won’t cause any damage to the machine or the supply.

Can I use a 5 amp fuse?

If the motor is increased to a 5 amp motor then a 5 amp fuse is ok. You could but you will risk damaging the device it is suppose to protect. Replace with the correct size fuse, if you are having a blown fuse problem you may have a short in the system. … If there is a short either will blow.

What uses a 1 amp fuse?

1 AMP Ceramic Fuse are suitable for various different uses. These include providing a reliable performance and cost-effective circuit protection. They are ideal for use in plugs to protect cables from melting or catching fire if they are overloaded.

Can I put a 3 amp fuse in a 10 amp plug?

The 13A fuse in place of a 10A fuse wouldn’t directly cause any problem – but then, if there’s a problem with the appliance you’re using, or if you plug in too many things and the current goes over 10A but under 13A, then under the new fuse the extension lead will keep working whereas the old fuse would have blown.

Can I use a 10 amp fuse instead of 15?

You can, it will may immediately blow, but it won’t hurt anything other than the fuse. … What you don’t want to do is use a higher amp fuse or something like a jumper wire. That could damage the wiring and start a fire.

Can I use a 13 amp fuse instead of a 3 amp?

For an appliance rated as 700W or less, a 3A fuse should be fitted. For appliances above 700W, a 13A fuse should be fitted. … BS1363 has standardised on just two preferred fuse ratings, 3A and 13A, however any fuse rating up to 13A can still be used.

Can I use a 2 amp fuse instead of 1 amp?

Originally Answered: Can I replace a fuse with a lower amp? Yes of course you can, that’s no problem. Of course, the fuse will blow sooner and maybe immediatley because the circuit is designed to pull more current than the fuse can handle, but that won’t do any actual harm… you just won’t be able to use the device.

What are 2 amp fuses used for?

Fuses are commonly available in the following sizes: 2 Amp: Suitable for up to 480 watts (black markings) and used in low power devices like radios and shavers. 13 Amp: Suitable for up to 3000 watts (brown markings) and used in high current devices such as kettles, toasters and heaters.

Does it matter what fuse you put in a plug?

The appliance itself is fused and that is to help protect the appliance. The fuse in a mains lead just needs to be rated at less than the maximum current capacity of the cable. So if you’re using 20 amp rated cable then a 13 amp fuse protects it.

Can I use a 13a fuse in a 5a plug?

Re: Can I use a 13A fuse in a 5A plug ? No. You must use a 5A fuse. Using A 13A fuse is a fire risk.

Can I put a 10amp fuse in a 5 amp?

Possibly yes. What ever is wired into that 5 amp slot is rated for a max of 5 amps, overdrawing more than 5 amps by removing the 5 amp fuse and putting in a 10 amp fuse can possibly short out a circuit.

What amp fuse do I need?

Plugs for appliances rated between about 700 watts and 3000 watts (the maximum rating of a wall socket) should be fitted with a 13-amp fuse (coloured brown). For example: 13A Fuse – Washing machine, dishwasher, microwave, kettle, toaster, iron.

Can I use a 3 amp fuse instead of a 2.5 amp?

Yup. The fuse is there to protect the wiring and 3 amp is well within the supply wire’s capability. Re: Radio calls for a 2.5 amp fuse.

What amp fuse do I need for LED lights?

75mm is good for about 7.5 amps max. I generally like to have at least 100% extra rating so a 3 amp fuse max is what i would use. This should be plenty for 4 leds. If you have working leds but blow a 10A fuse i think your wiring needs checking and you will probably find your fuse is directly across the battery.

How can you tell if a 13a fuse is blown?

Look at the fuse wire. If there is a visible gap in the wire or a dark or metallic smear inside the glass then the fuse is blown and needs to be replaced.