Question: Can You Use A Different Amp Fuse?

Can I replace a 13a fuse with a 5a fuse?

not it’s not.

the device can’t take more than 5A that’s why it has a 5A fuse.

if you put a 13A fuse in the device might take upto 13A before the fuse blows and more than likely you’ll fry it..

Can I replace a 10amp fuse with a 5 amp?

Possibly yes. Some circuits in older houses might contain Fuse Wire instead of Fuses. … If this is the case in your house, you should use 5 amp wire for a lighting circuit, 15 amp for an immersion heater circuit, 30 amp wire for a ring main or cooker circuit (for cookers up to 12 kw).

What will cause a fuse to keep blowing?

Cause 2: A Short Circuit A short circuit is a type of electrical fault. … This causes excessive current flow in the power source by way of the “short” or “fault.” Overloaded wires will overflow and cause damage. A short circuit might even cause the electrical device responsible for it to be destroyed.

What are 3 amp fuses used for?

Different types of fuses Plugs for appliances rated up to about 700 watts should have a 3-amp fuse (coloured red). For example: 3A Fuse – Table lamp, standard lamp, television, video, computer, mixer, blender, fridge, freezer, power drill, jig saw, soldering iron.

Why does my 15a fuse keep blowing?

Causes of Blown Fuses Having too many devices plugged into a circuit is the most common cause of fuses blowing. … Another potential cause of fuses blowing is a short circuit. When a hot wire touches either the grounding pathway or a neutral wire, it results in the circuit shorting out.

Can I use a 15 amp fuse instead of a 10 amp fuse?

Yes, the 15 Amp fuse may be sized for a device in that particular circuit, and the 10 Amp fuse may be very short lived.

What happens if you replace a fuse with a higher amp fuse?

If you replace a fuse with a higher amp one it will work but create an unsafe circuit. It could cause a failure of the device burn it up, start a fire. The fuse is designed as a safety device. It should not only be the correct amperage but also the correct voltage and fast or slow blow.

How do I know what amp fuse to use?

You’ll usually find the fuse rating on the side of your fuse, which will be given in amps. Fuse rating is the amount of current needed for the fuse to blow or break. When this happens, it stops the electrical power from flowing through the electrical circuit.

What happens if you replace a 15 amp fuse with a 20 amp fuse?

If you replace it with a 15A fuse it will not overload the wire and will blow when the continuous current exceeds 15A so yes you can safely replace the 20A fuse with a 15A fuse. Conversely you cannot replace a 20A fuse with a 25A fuse as you will overload the circuit and quite possible start an electrical fire.

Can you put a 20 amp fuse in a 15 amp car?

No. Here if the current flows is between 15–20 amp, which is more than the rating of slot so fuse should operate but its a 20 amp fuse so it will not operate.

Can you use a lower amp fuse?

Do not use a fuse with a lower rating– don’t put a 20 amp fues in a 30 amp circuit–because it probably will blow prematurely. Conversely replacing a 20-amp fuse with one rated at 30 amps is dangerous because it may not blow soon enough and damage an electrical component or start a wiring fire.

Is using a higher amp fuse bad?

In general, NO. Replacing a fuse with a higher-amp fuse is a very bad idea and can lead to fires. Fuses (and circuit breakers) are rated such that they blow or trip before any part of the circuit gets to a dangerous current. … Fix the underlying problem, and you won’t have any more blown fuses.

What happens if you use the wrong amp fuse?

Fuses are present to protect the components of the electrical system. Rather than destroying the circuit when there is a surge of power, the fuse blows to protect it. … If you use a fuse with the wrong amperage, the fuse won’t blow as intended, damaging the circuit and resulting in a much larger repair bill.

Can I replace a 10amp fuse with a 13 amp fuse?

If you replaced it with 13A fuse, it will allow current more than 10A, so it may possible that other components may get damage due excessive current flow than specified. If TV components can sustain up to 13 A current, you can replace it. … You can put a smaller fuse in with the same “speed” rating.

Can I use a 3 amp fuse instead of a 2.5 amp?

Yup. The fuse is there to protect the wiring and 3 amp is well within the supply wire’s capability. Re: Radio calls for a 2.5 amp fuse.